DEVELOPER PREMIER LR 6X10 LT
DEVELOPER PREMIER VLR 6 X 10 LT
CDPRVLR610 is formulated for use in minilab with developer time equal or shorter than 45”. The new “clear” formula is very easy to mix. For the technical point of view it is necessary to set the temperature and replenishment rate according to the following table:
20-22 sec 40° 108 ml/m²
27 sec 38° 90 ml/m²
30-33 sec. 38,5° 80-85 ml/m²
45 sec. 38° 68-72 ml/m²
The main characteristic of this product is the simplicity of use, because each dose is in a single bottle instead of the three traditional parts; it eliminates mixing errors and contributes to the reduction of packaging volume and plastic containers waste.Furthermore this developer is slightly scented: this means more “safety” in the working place and a better and more comfortable situation for the minilab customers.It is important to underline that because of it’s particular formulation the CDPRVLR610 developer is compatible with the developer in three parts as well as with the other developers with similar characteristics.
DEVELOPER PREMIER HVLR 6 X 5 LT
DEVELOPER SINGLE PART AT HIGH LOW REPLENISHMENT RATE 45 ml/m²
UNIVERSAL BLEACH FIX
this super-concentrated liquid works in any existing RA4 process.
Standard RA4
To Make 10 liters of standard bleach-fix replenisher (215 ml/m²)dilute 2 liters of concentrated with 8 liters of water
To make working solution of RA4 bleach-fix (215 ml/m²): 1000 ml/m² ( as replenisher).
Prime
To make 7 liters of standard bleach-fix replenisher (108 ml/m²) dilute 2 liters of concentrated with 5 liters of water.
To make working solution of standard bleach-fix (108 ml/m²): 700 ml of replenisher +
300 ml of water.
Prime LORR
to make 5 liters of bleach-fix LORR replenisher (54 ml/m²) dilute 2 liters of concentrated with 3 liters of water. This product is fully compatible with the equivalent multipart bleach-fix. Therefore it is possible to replenish on top of existing bleach-fix without any modification in the processing conditions.
To make working solution of bleach-fix LORR (54 ml/m²)
ml of water.
BLEACH-FIX AT VERY LOW REPLENISHMENT RATE 60 ml/m²
It should be used with CDPRVLR
