<<  

CDPRVLR610

CDPRVLR610

DEVELOPER PREMIER VLR 6 X 10 LT

  • CDPRVLR610 is formulated for use in minilab with developer time equal or shorter than 45”. The new “clear” formula is very easy to mix. For the technical point of view it is necessary to set the temperature and replenishment rate according to the following table:

  • 20-22 sec  40°  108 ml/m²

  • 27 sec  38°  90 ml/m²(30C) Replenishment rate (ml

  • 30-33 sec. 38,5°  80-85 ml/m²

  • 45 sec. 38°  68-72 ml/m²

    The main characteristic of this product is the simplicity of use, because each dose is in a single bottle instead of the three traditional parts; it eliminates mixing errors and contributes to the reduction of packaging volume and plastic containers waste.Furthermore this developer is slightly scented: this means more “safety” in the working place and a better and more comfortable situation for the minilab customers.It is important to underline that because of it’s particular formulation the CDPRVLR610 developer is compatible with the developer in three parts as well as with the other developers with similar characteristics.

CDPRVLR610 is a low replenisher  developer to be used

in the Prime LORR type process. In fact the CDPRVLR610 developer parameters are

correspondent to SP LORR developer at 80 ml/m². The “clear” formula is very easy to

mix. The main characteristic of this product is the simplicity of use, because each dose

is in a single bottle instead of the three traditional parts; it eliminates mixing errors and

contributes to the reduction of packaging volume and plastic containers waste.

Furthermore this developer is slightly scented: this means more “safety” in the working

place and a better and more comfortable situation for the minilab customers.

It is important to underline that because of it’s particular formulation the CDPRVLR610

developer is compatible with the traditional developers in three parts as well as with the

other developers with similar characteristics (monopart or single part).

CDPRVLR610 is compatible with all Prime processes (replenishment rate = 108 and 161 ml/m²)

and can be used without any change of the developer working tank, providing only

diminution of the replenishment rate.

!
 <<  
Only